Maxoak/EB150 Portable Power Station, Power Outdoor.
- Capacity: 1500Wh/1000W
- Battery Cell: Top-Brand Lithium Polymer Battery Cell ,2500+ cycle life
- Load: Continuous 1000W(1000W-load-1200w@2mins,Above 1200W,turn off)
- Multi-Outputs for Various Power Needs: 2* 110V AC Outlets(Pure sine wave), 12V/9A Car port,1* PD 45W USB-C and 4*5V/3A USB
- Regulated DC12V,Care for Car-powered Devices.
- Solar Input: Max.500W, OCV 16-68V,Current Max.10A, MPPT
1500Wh/1000W(Max.), Longest Lasting Lithium Power Station, Specially Designed for High-power Device Such as Blender, Drill, Hair Dryer (Max.1000W).
Built-in Top-brand lithium-ion battery cell, Safety, and Quality is Rest Assured. Battery Management System (BMS), Protect from Overvoltage, Overcurrent, Short-circuit, Temperature Control & more Safeguards.
MC4 Solar Charging Cable is Included, No need other Charge Controller; Pure sine-wave, power safer, better protect your device during charging. Auto Shut off after Fully Charged;
2*AC Outlets (Standard AC120V US Plug) for Most Household Appliance under 1000W. 1*DC12V for Car Powered Devices like Car Fridge, Car Vacuum Cleaner, 1*PD Type-C (Max 45W) for USB-C Devices, Such as Laptop MacBook & PD USB-C Phones, 4*5V3A(Max) USB for phones, Tablets, Camera, etc, Keep Multi Devices Powered.
The Power Generator Can be Recharged with Solar Panel (Open Circuit Voltage must be 16V～60V (Max), Max 500W, Solar Panel not Included). Charge Time varies on the Solar Panel(Higher Power of the Panel, Shorter Charge Time you will Get), eg. 300W Solar Panel: About 5-5.5Hrs. 3*150W Panel in Series: About 3.5-4Hrs.
The regulated DC12V is used to charge some car-powered devices like car cleaners, car fridges, car vacuums, car cookers, and so on, the constant 12v can better protect your device and charge it smoothly.
What is the capacity of this EB150 power station?
1500Wh,101351mAh/14.8V( equivalent to 405405mAh 3.7V).
What kind of battery cell used in the EB150 power station?
We built in LG Li-ion battery cell, ,4S3P.
Can charge and discharge at the same time?
Yes, you can.
What kind of product can be charged by the EB150 power station?
For AC powered device, make sure the max. power of the device is no more than 1000W. for overload capacity, 1000W ≤Load<1200W @2Min,1200W≤Load @1s;
How to choose compatible Solar panel?
It must meets:
1)Open Circuit Voltage(OCV):16-60V/Max.10A, Max.500W (DC7907 to MC4 Charging cable is included)
Tips: make sure the total OCV(open circuit voltage) is no more than 60V if you connect several solar panel in series!!
How long can be recharged by Solar Panel?
It depends on the input power of the solar panel and the strength of the sunlight.
For example, for 300W input solar energy, the charge time is about 5-5.5Hrs. for 500W solar panel, the charge time is about 3.5-4hrs.
Can I connect the solar panel in series or in parallel?
Yes, you can. for example, connect 2*DC18V(rated power)/150W solar panel in series, if the OCV(open circuit voltage is 22V), so connect 2 pcs in series, it is finally total 44V/300W.
How long should I recharge the EB150 power station if I do not use it for a long time?
We suggest to recharge it very 3 or 6 months for better protect the battery cell and ensure a longer life cycle.
Anything else important should I know?
Note: When the total output power exceeds 1000W, the DC output will be directly shut down. When the load is less than 30W, the output power would not be displayed. When a high-power appliance is attached to the product, the displayed output power and the actual output power could be different for up to 30W.
Fast charge time
Easy portable power
Very easy to operate. Fast charging on solar or AC. Easy to move around.
I upgraded from a 500 watt power generator to the bluetti 1500 1000 watt and now I don’t have to worry about running out of power everyday
I use this unit to run most of the lower powered circuits on an off-grid cabin. It has replaced a bank of lead acid batteries along with their charge controller, inverter and mess of cables. Much cleaner, safer and more efficient setup.
I’ve only been able to get 1185-Watt Hours out the EB150 before it shuts down (79% efficient). That’s better than the lead acid system but I expected a bit better.
There is a very high level of rfi coming from the mppt charge controller. I will order ferrite cores to control it.
|Capacity:||1500Wh (3.7V 405,000mAh ,101,351mAh/14.8V)|
|Inverter Load:||Continuous 1000W (1000W≤load<1200W @2min;1200W≤load@1s)|
|Battery:||Top-Brand Lithium Polymer Battery Cell, 101351mAh/14.8V|
|AC/PV Input:||7.9*0.9mm DC, 42V/200W, OCV 16V~68V /MAX.10A|
|AC Output:||Pure sine-wave, 110V,Continuous Max.1000W||Cigar Lighter Output:||Constant 12V, DC 12V/9A|
|USB Outputs:||1*PD 45W USB-C(5-20V), 4* 5V,3A USB-A|
|Solar Charge Mode:||MPPT MPTT Efficiency:99.5%|